If you have a Sony DVD player, depending on the model, you may be able to change the output setting to interlaced by doing one of the following: You may need to refer to the instruction manual of your DVD player for specific details about changing from progressive to interlaced scan. If not, the DVD player should be set to output an interlaced signal. ![]() ![]() IMPORTANT: Some televisions may not be able to display a progressive signal. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced.NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Play a different DVD to determine whether or not the problem is being caused by the disc itself.NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types. Ensure the video cable between the DVD player and TV is securely connected to both devices.Ensure the DVD player is not connected to a VCR due to copyright protection, the picture will not playback properly through a VCR.IMPORTANT: Poor picture quality on a High-Definition Television (HDTV) may be related to the type of signal being received click here for further information.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |